Buoyancy Lab: Archimedes' Principle
Drop a block into a tank, or hang it from a force scale, and change its density and the fluid. Watch the buoyant force, the part of the block under the surface, the water that rises or spills over into the beaker and the block settle at its floating depth.
Archimedes' Principle: Buoyant Force, Floating and Sinking
A body in a fluid feels an upward buoyant force equal to the weight of the fluid it displaces: F = ρ(fluid) g V(submerged). It floats when its density is smaller than the density of the fluid and then sinks into the fluid until the displaced fluid weighs exactly as much as the body, so the submerged fraction is ρ(object) / ρ(fluid). A denser object sinks and, held on a force scale, seems lighter by exactly the buoyant force.
This lab uses a rectangular block in a Eureka can. Choose the material of the block and the fluid, drop the block from a height and watch it dip, bob and settle, or hang it from a force scale and lower it into the water to read its apparent weight. The water level rises by the submerged volume divided by the area of the tank and water above the spout spills into a catch beaker. The model is an ideal incompressible fluid with no surface tension and vertical motion only.
Frequently Asked Questions
Why does a steel ship float when a steel block sinks?
What counts is the average density of the whole body. A hull encloses a large volume of air, so the ship displaces a lot of water for its mass and its average density is below that of water. Solid steel is almost eight times denser than water and sinks. Even solid steel floats on a mercury-like liquid, which is about 13.5 times denser than water.
How much of a floating block is under the surface?
The fraction ρ(object) / ρ(fluid). A block of density 600 kg/m³ floats 60% submerged in fresh water, and a little deeper in oil than in salt water. For ice (about 917 kg/m³) in fresh water the fraction is 91.7%, which is why most of an iceberg is hidden.
What does a force scale read when the block hangs in water?
The apparent weight: the weight minus the buoyant force, W − ρ(fluid) g V(submerged). A fully submerged block of aluminium (2700 kg/m³) in fresh water reads about 63% of its weight. If the block is less dense than the fluid the scale reads less than zero, because the block would have to be pushed down to stay under.
Are the density values in the presets exact?
No. They are typical textbook values at room temperature. Wood and foam vary by a factor of two between species and products, and salt water depends on how much salt is in it. Use them as starting points or type your own density.