hoan.uk

V-dipole antenna lab

Antennas

About

ToolIntermediateAges 13–996 minITU-ARRL RF-TECH-04NGSS HS-PS4-5

Choose a frequency, V angle and conductor and read off the leg length and tip-to-tip span of a horizontal V-dipole for NOAA and Meteor-M satellite reception.

Steps

0 of 4 done

How it works

V-Dipole Weather Satellite Reception Tips

1. Mount Direction & Placement

Mount the V-Dipole horizontally (parallel to the ground). The V should face North (pointing opening North). This orientation yields the best polar orbiting satellite pass coverage (NOAA/Meteor) as they fly North-to-South.

2. Simple Construction

Often built using standard telescopic rabbit-ear TV antennas, metal rods, or copper wire taped to a PVC pipe bent at 120°. The 120° angle yields a feedpoint impedance of roughly 50Ω, allowing a direct connection to RG-58 coax without any complex matching networks.

V-Dipole Antenna Theory & Satellite Reception

V-Dipole antenna is a horizontal half-wave dipole bent at an angle (typically 120 degrees). It is highly popular in the satellite weather hobby because of its simple design, ease of construction, and excellent radiation pattern for receiving VHF downlinks from polar-orbiting satellites, such as the NOAA APT (137 MHz) and Russian Meteor-M satellites.

Bending the dipole elements into a "V" shape at a 120-degree angle does two things: it reduces the radiation gain at the horizon (ground noise) and redirects the main lobes straight up into the sky. Additionally, this configuration provides a circular polarization approximation at high elevation angles, which is required for satellite tracking.

Technical Reference & Best Practices

Why 120 Degrees?

A standard straight dipole (180 degrees) has a feedpoint impedance of about 73 Ohms. Bending the elements closer together drops the impedance. At 120 degrees, the impedance drops to very close to 50 Ohms. This allows a direct match to standard 50 Ohm coax cables (such as RG-58 or RG-174) without needing a lossy impedance transformer (balun or match box).

V-Dipole Directivity

The V-Dipole should be mounted horizontally with the opening of the "V" pointing directly North. Because NOAA and Meteor satellites orbit from pole to pole (North to South), this direction optimizes the antenna's reception pattern along the satellite's flight trajectory, giving you maximum pass duration and cleanest signals.

Signal Preamplification (LNA)

While a V-Dipole can receive NOAA signals directly into an RTL-SDR receiver, using a low-noise amplifier (LNA) with a built-in bandpass filter for 137 MHz (such as the Nooelec SAWbird+ NOAA) will dramatically improve your image quality. The LNA boosts weak signals and blocks out-of-band FM and pager interference.

Quiz

How long is each leg of the V-dipole?
What happens to the tip-to-tip span when you open the V from 90 to 180 degrees?
Why is a V-dipole popular for NOAA and Meteor-M reception?

Element Cut List & Specifications V-Dipole

Tip-to-Tip Span907.5 mmThe total horizontal width between the two element tips.
Leg Angle120 °Angle between the two legs. Standard is 120°.